Girnar Steels Industries

SS Socket-weld pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This Socket weld flanges are typically used on smaller sizes of high-pressure pipes. These allow for a smooth bore and better flow of the fluid or gas inside of the pipe.ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092. Socket Weld Flange Pressure:- 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Socket Weld Flange.

A flange is an external or internal ridge, or rim (lip), that is used for strength. Stainless Steel Split Flanges can also be used as an attachment to another object, such as Stainless Steel Screwed Flanges attached on the end of a pipe, steam cylinder, etc. Pipes with Stainless Steel Slip-On Pipe Flanges can be assembled and disassembled with ease. Providing you the best range of stainless steel flanges, long weld neck flange, weld neck flanges, plate flange, slip on flanges and socket weld flanges with effective & timely delivery. Stainless Steel Flanges is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral Flanged assembly. Flanges are joined to each other by bolting, and are joined to the piping system by welding or threading (or loose when stub ends are used),The basic types of Flanges are: 

• Slip-on
• Socket weld
• Blind
• Lap joint
• Weld neck
• Orifice
• Threaded forged stainless steel

We offer a wide range of Stainless Steel Rings of various shapes made by latest techniques and trends of market industry. These are made up of quality raw material procured from trusted vendors. These steel rings are featured with some astonishing properties such as strength, reliability, durability. Salient Features Strength Durability Reliability Corrosion resistance Close tolerances. Creative and Special High quality, low price Acid and corrosion resistance. 

Stainless Steel Flanges are made up of different stainless steel materials. There are different grades to the stainless steel depending on the material composition and the mechanical properties vary. Navstar Steel is a leading manufacturer and supplier of these flanges. The ASTM A182 Weld Neck Flange are made up of a super austenitic material that has good corrosion resistant properties with low carbon in its composition. The applications include utility scrubber assemblies. The flanges are also used in acid production and fertilizer production plants due to its corrosion resistance. The Stainless Steel Pipe Flange is used to close a pipeline in these industries. The blind flange can be permanently fixed with welding or temporarily fixed by bolting for easy maintenance and removal. These flanges come in different sizes ranging from ½ inches to 48 inches in nominal bore size.

Grade 1 titanium is the first of four commercially pure titanium grades. It is the softest and most ductile of these grades. It possesses the greatest formability, excellent corrosion resistance and high impact toughness.
Because of all these qualities, Grade 1 is the material of choice for any application where ease of formability is required and is commonly available as titanium plate and tubing. These include: Chemical processing, Chlorate manufacturing, Dimensional stable anodes, DesalinationArchitecture, Medical industry, Marine industry, Automotive parts, Airframe structure

This is a flange without a bore and is used to shut off a piping system or vessel opening. It also permits easy access to vessels or piping systems for inspection purposes. Blind flange can be supplied with or without hubs at the manufacturer options. Standard:- ASTM A182, A240. Grades:- F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H, 317, 317L, 321, 321H, 347, 347H, 201, 202, 904L.

This is designed to be joined to a piping system by buttwelding. It is relatively expensive because of Its long neck, but is preferred for high stress applications. The neck, or hub transmits stresses to the the base of the hub to the wall thickness at the butt weld, provide important reinforcement of the flange. 

Lap Joint Flange Jis 16k slide directly over the pipe and are usually used in combination with stub end fittings. A pipe is welded to the Stub End fitting, while the Lap Joint Flange Jis 5k is free to rotate around the stub end. The benefit of the Lap Joint Flange Jis 10k, is that there will not be any issues with regards to the bolt hole alignment. The Lap joint flanges use a stub end that is welded to the pipe. permitting easy flange alignment of the bolt holes. A lap joint flange is also called Van Stone or Stub Flange. A stub ends are available in three styles (Types A, B, and C) and two lengths (Short and Long).Lap Joint Flanges Standards:- ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092. Lap Joint Flanges Pressure Calculation in DIN:- 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Lap Joint Flanges.

A flange is a type of device that is used to connect valves, pipes, pumps and other equipment that form a piping system. The Threaded Flange Jis is known to also provide easy access for the inspection, cleaning as well as its modification. Flanges are generally screwed or welded. The Threaded Flange Jis joints are produced by bolting together two flanges together with a gasket in between them in order to provide a seal. Threaded Flange Din En 1092-1 is similar to a slip on pipe flanges. The exception between the two being that the bore of Threaded Flange Jis has tapered threads. Threaded pipe flanges are used in combination with pipes that are externally threaded. One of the main benefits of these pipe flanges is that they can be attached without the need for welding. Although these Threaded Flange A105 are not welded, yet sometimes a seal weld is also used in conjunction with the Threaded Flange Asme B16.5 connection.

Our Stainless Steel Blanks width up to 600mm is acclaimed for its make. Our company guarantees to make delivery of bulk as well as retail orders of the product within the mutually decided timeframe. We are a trustworthy name, involved in offering excellence in the form of Stainless Steel Blanks. Features:- Hard Tendancy, Thermal Conductivity, Resist rust, Tenacity, High Mechanical Strength, Corrosion Resistant. Application:- Manufacturing Pipes. Stainless Steel Blanks does not readily get corroded, resist rust or stain with water like other ordinary blanks do. It is well recognized as SS Blanks among many customers and is available in different sizes. Manufactured using premium quality carbon and steel, it offers a corrosion resistant working. It has widely brought into used for pipes and is available at reasonable prices. They are having soft and smooth texture which can be availed in specific dimensions.

This high content of molybdenum, chromium and nitrogen in the WERKSTOFF NR. 1.4410 Hot Rolled Bar results in the alloy yielding excellent resistance to chloride pitting and crevice corrosion attack. Due to the duplicity present in the microstructure of   Super Duplex Steel S32750 Cold Finished Bar, the alloy has exceptional resistance properties against chloride ion stress related corrosion cracking. Usage of Duplex 2507 alloy at temperatures exceeding 600° F is frowned upon by super duplex 2507 round bar suppliers in Mumbai. This is because exposure at a temperature range above 600° F and extended use of the Super Duplex Stainless Steel S32760 Hollow Bar at elevated temperature settings could reduce both the toughness as well as corrosion resistance properties of alloy 2507. Although it has a short coming with regards to its elevated temperature use, one has to note that the Super Duplex S32750 Rod possesses excellent mechanical properties. Often a light gauge of the Super Duplex Steel S32760 Bright Bar material could be used to achieve the same design strength of a thicker cross sectioned nickel alloy. Thus the savings in weight can dramatically result in a reduced overall cost fabrication of 2507 Duplex Round Rod.

We supply Stainless Steel Dairy Fittings and SS Dairy Fittings in various grades & dimensions as per requirement. Our dairy fitting products include high quality Dairy Bends, Dairy Tee, Dairy Reducer, TC Clamps, Pipe Holder Clamp, SMS Union, SMS Nipple (Barrel), SMS Liner, DIN Union, TC Ferrule, Hose Clamps, Tri Clamp Tee, Tri Clamp Elbow, Tri Clamp Reducer, SS Spray Balls, Diaphragm Valve, Cleaning ball.